Other

Touch panel screen 3''4 Monochrome Ethernet W/P/R

Touch panel screen 3''4 monochrome G/O/R

Advanced touchscreen panel stainless 640 x 480 pixels VGA- 10.4" TFT - 96 MB

TouchScreen 320×240 pixel QVGA - 5.7" TFT - 96 MB

advanced touchscreen panel 640 x 480 pixels VGA- 10.4" TFT - 96 MB

Keypad touchscreen panel color - 640 x 480 pixels VGA -10.4" - TFT LCD

Keypad touchscreen panel color - 320 x 240 pixels QVGA- 5.7" - TFT LCD

Touch Screen, Flat, Magelis GTU Series, TFT LCD Color, 1024 x 768 Pixels, 12.1 ", 24 Vdc.

Touch Screen, Flat, Magelis GTU Series, TFT LCD Color, 800 x 600 Pixels, 10.4", 24 Vdc.

DRIVE CONTROLLER, SINGLE LINE, WITHOUT POWER SUPPLY, 36 AMP, IP 20, 700 V DC, (R911298766)

Flash memory card 128mb

400V SERVO MOTOR 3.5KW

400V SERVO MOTOR 1KW

OUTPUT FILTER 380/500V 4AMP

OUTPUT FILTER 380-500 VAC,3 PHASE, 50/60 HZ

On-off valve HEE-D-MINI-24 For Service units, without Threaded Connection plates with FRB Threaded pin Design structure=Piston slide, Type of actuation=electrical, Sealing principle=soft, Exhaust-Air function=not throttleable, Manual override=detenting

HDD02.2-W040N-HD32-01-FW by Rexroth, Indramat, Bosch is a Drive Controller in the HDD Series. The HDD02.2-W040N-HD32-01-FW features a Cooling Method of air, internal (with built-in blower) and a Rated Current of 40 A.

SERVO DRIVE, 70 AMP, 3 PHASE, 400-599 VAC, 1.5-75 KW LINE, AIR INTERNAL COOLING MOOD, 0-1600HZ, R911308417

SERVO DRIVE, INDRADRIVE C, 30 AMP, 3 PHASE, 200-530 VAC, 50/60 HZ

DRIVE, 3-PHASE/1-PHASE, 200-500 VAC (3 PHASE)/200-250 VAC (1-PHASE), 24 VDC CONTROL VOLTAGE, 1.5 TO 11 KW LINE, 1 DESIGN, AIR INTERNAL COOLING MOOD, 54 AMP, 12 AMP

SERVO MODULE, 3 PHASE, 13 AMP INPUT, 200-500 VAC INPUT, 50/60 HZ, 12 AMP OUTPUT, 0-530 VAC OUTPUT, 0-1600 HZ

SERVO DRIVE POWER SECTION, 11.5 AMP MAX, 200-500 VAC, AIR COOLING, IP 20, INTERNAL (THROUGH INTEGRATED BLOWER), 1.5-11 KW, R911298371

AC SERVO MOTOR, 5.6 AMP, 103 VAC, 3000 RPM, 750 W

Rotary positioner, DIN 96x96 mm panel mounting, 24 VDC, 8x PNP outputs (requires E6CP/E6F encoder)

Rotary positioner, DIN 96x96 mm, track/surface mounting, 24 VDC, 8x PNP outputs (requires E6CP/E6F encoder)