Products

3-wire screw terminal base for temperature modules (16 I/O 10 common 4 +V 8 chassis ground 2 sets of CJC)

Terminal Base, Flex I/O, Fused, 16 Point, 22 - 12 AWG, 10 Amp, 250 Volt AC/DC

1799-CD0D16B20BK KUKA 36PT BOARD

Relay, Overload, 1.0 - 5.0A, E1 Plus, Solid State

PE terminal, Tension-clamp connection, 2.5 mm², 300 A (2.5 mm²), Green/yellow

Switch, Disconnect, Non-Fused, 100 Amp, 690 Volts AC, 3 Pole, 2 Position, Body and Shaft, Base/DIN Rail Mount

Disconnect Switch, Non-Fused, 3P, 2-Position, 25A, 690VAC

Disconnect Switch, Fused, 60 Amp, 600 Volts AC, 250 Volts DC, Class J, Rotary

VLT 2800 0.55kW Inverter Drive 1.7A, 3-Phase with a 380...480VAC Supply

DRIVE, VLT 2800 SERIES, 1.5 KW, 200-240 V AC, 50/60 HZ, IP 20 ENCLOSURE, STANDARD W/ BRAKE, BUILT-IN DISPLAY UNIT, W/ FILTER OPTION

DRIVE, VLT 2800 SERIES, 2.2 KW, 380-480 V AC, 50/60 HZ, IP 20 ENCLOSURE, BUILT-IN DISPLAY UNIT, W/ FILTER, PROFIBUS PROTOCOL

SIMOTICS S-1FK2 CT servo motor M0=2.4 Nm; PN = 0.57 kW at nN=6000 rpm (380-480 V); PN = 0.75 kW at nN=3000 rpm (200-240 V); with holding brake; degree of protection IP64; cylindrical shaft D19x40mm; absolute encoder single-turn 22-bit (encoder AS22DQC); with OCC interface;...

SIMOTICS S Synchronous servo motor 1FK7 Compact 3.0Nm, 100K, 6000rpm 1.02kW, Naturally cooled IM B5 (IM V1, IM V3) power/signal connectors Connector can be rotated by 270 BASIC ABSOLUTE ENCODER 32 P/REV (ENCODER A-32) WITH DRIVE-CLIQ INTERFACE

MOTOR SYNCHRONOUS SIMOTICS S SYNCHRONOUS MOTOR 1FK7-CT PN=2.6 KW; UZK=600V M0=16NM (100K); NN=2000RPM; NATURAL COOLING;

SIMOTICS S Synchronous servo motor 1FK7 compact, 36Nm 100K, 3000rpm, 4.40kW Naturally cooled IM B5 (IM V1, IM V3) power/signal connectors Connector can be rotated by 270° ABSOLUTE ENCODER ENDAT 2048 P/REV (ENCODER A-2048)

SIMOTICS S-1FL6 SUPPLY VOLTAGE 400V 3AC PN=0.75KW;NN=3000RPM M0=3.5NM;MN=2.39NM SHAFT HEIGHT 45MM ENCODER INCREMENTAL TTL 2500PPR WITH SHAFT KEY, TOLERANCE N WITHOUT HOLDING BRAKE PROTECTION CLASS IP65 WITH OIL SEAL MATCHING DRIVE SINAMICS V70&V90

SIMOTICS S-1FL6 SUPPLY VOLTAGE 400V 3AC PN=0.75KWNN=3000RPM M0=3.5NMMN=2.39NM SHAFT HEIGHT 45MM ENCODER INCREMENTAL TTL 2500PPR WITH SHAFT KEY, TOLERANCE N WITH HOLDING BRAKE PROTECTION CLASS IP65 WITH OIL SEAL MATCHING DRIVE SINAMICS V70&V90

SIMOTICS S-1FL6 SUPPLY VOLTAGE 230V 3AC PN=1.5KW

SIMOTICS S-1FL6-1FL6 SUPPLY VOLTAGE 400V 3AC PN=0.75KWNN=2000RPM M0=4NMMN=3.58NM SHAFT HEIGHT 65MM ENCODER INCREMENTAL TTL 2500PPR PLAIN SHAFT, TOLERANCE N W/O HOLDING BRAKE PROTECTION CLASS IP65 WITH OIL SEAL MATCHING DRIVE SINAMICS V70&V90

SIMOTICS S-1FL6-1FL6 SUPPLY VOLTAGE 400V 3AC PN=1KW