Overige

MOTOR CONTROLLER, INPUT: 1-48 VDC, 5.5 AMP, OUTPUT: 2 V DC, 0-10KHZ, 8 AMP

Motor controller CMMP-AS

IGBT MODULE, INSULATED GATE BIPOLAR TRANSISTOR, 75 AMP, 1200 V COLLECTOR-EMITTER VOLTAGE, +/- 20 V GATE-EMITTER VOLTAGE

Indra Control L40 I/O Extension Module

INSULATED GATE BIPOLAR TRANSISTOR, 600AMP, 1200V

IGBT Module, Single, 600 A, 1.2 kV, 3.67 kW, 150 °C, IGBTMOD

IGBT Module, Dual (Half Bridge), 600 A, 1.2 kV, 3.67 kW, 150 °C, Module

IGBT Module, Dual (Half Bridge), 200 A, 1.2 kV, 1.13 kW

Long Range Line Bar Code Scanner, Line Version, straight light emission reading distance long range Host interface RS 232 + RS 422/485, CAN Cable length approx. 0,9 m with 15 pin D-Sub HD connector Operating voltage: 18 ... 30 V DC

Code reader, Standard Density. Code resolution: 0.25 mm ... 1 mm. Reading distance (at code resolution): 500 mm ... 2,100 mm (0.5 mm).

Bar code scanner CLV43x / CLV430 / Long Range, RASTER SCAN / STANDARD / SOFTWARE SELECTABLE HOST PORT RS 232/42/485

CPU with built-in EtherNet/IP port, 5K steps program, 32K words data memory, 32K words x 1 bank EM, 2560 I/O max, option port for RS-232C/485, USB programming port, 3 expansion racks max.

CPU, 20K steps program, 32K words data memory, 32K words x 1 bank EM, 2560 I/O max, RS-232C serial port, USB programming port, 3 expansion racks max

CPU with built-in EtherNet/IP port, 100K steps program, 32K words data memory, 32K words x 4 banks EM, 2560 I/O max, RS-232C serial port, USB programming port, 3 expansion racks max.

CJ Series Programmable Controller Accessory, end plate, 14.7 mm width, mounted to the right-hand side of CJ-series CPU racks or expansion racks

Temperature control module, 4-Thermocouple (J or K) input, PNP output, 250 mA max at 5/DC

Temperature control module, 4-Thermocouple (J or K) input, NPN output, 250 mA max at 5/DC

CompoBus/S Master module, remote I/O communications, 128 - 256 I/O points, 40 mountable units, variable 1 or 2 allocation, 8 addresses per node, 32 connectable slaves

Serial communication unit, 1x RS-232C port + 1x RS422/485 port, Protocol Macro, Host Link, 1:N NT Link, No protocol, Serial Gateway (CompoWay/F, Modbus-RTU, Modbus-ASCII, Host Link), Modbus RTU Slave

Serial communication unit 2x RS422/485 ports Protocol Macro Host Link 1:N NT Link No protocol Serial Gateway (CompoWay/F Modbus-RTU Modbus-ASCII Host Link) Modbus RTU Slave

Serial communication unit, 2x RS-232C ports, Protocol Macro, Host Link, 1:N NT Link, No protocol, Serial Gateway (CompoWay/F, Modbus-RTU, Modbus-ASCII, Host Link), Modbus RTU Slave

PROFIBUS DP slave unit, up to 100 words in and out, 180 words maximum

Profibus-DP master module, 9.6 to 12Mbit/s, 7k words I/O and 25 words CIO, 9-pin female sub-D connector, rotary switch, 400 mA at 5/DC

Power supply unit, 24 VDC, output capacity: 25 W

Power supply unit, 100-240 VAC, output capacity: 25 W, with RUN output